How to Choose a Live Center

Updated · 2026.09.30

How to choose the right live center series by balancing the three core trade-offs of load, RPM and accuracy.

How to Choose a Live Center

Overview

A live center supports one end (the center hole) of a workpiece on a lathe while rotating together with it. Thanks to its internal bearings, the center point spins in sync with the workpiece, allowing high-speed machining without the friction heat and wear of a fixed dead center. Which live center suits your job is decided by balancing three axes: workpiece weight (load), required RPM and required accuracy. These three are in a trade-off relationship — maximizing one constrains the others.

Key Features

  • Load: workpiece weight and cutting thrust — sets the bearing capacity and shank (MT) size
  • Max RPM: high-speed capability — limited by bearing type, preload and seal friction
  • Accuracy (run-out): wobble of the center point — governs concentricity in precision work
  • Seal rating: defense against coolant/chip ingress — determines service life and environment fit
  • Point geometry: standard 60°, carbide-tipped, or pipe bull-head, etc.

Selection Guide

1. Load vs RPM

A bearing cannot withstand unlimited load and speed at the same time. As a rule, heavy-duty models with high permissible load (e.g. the TN heavy-duty type) have a lower maximum RPM, while high-speed models (e.g. the BS high-speed standard or BHS super-high-speed types) carry a relatively lower load. Fix your workpiece weight and target RPM first, then find in the dimension table the series that satisfies both.

2. Accuracy vs Versatility

The smaller the run-out (TIR), the better the workpiece concentricity and surface quality. POINTTECH guarantees point run-out within 0.003mm on its precision models. For high-precision grinding and fine turning, the BNH high-speed premium type is recommended; for general CNC work, the BN CNC standard type.

3. Environment (coolant / chips)

In environments that flood the work with coolant, multi-seal types such as UN/UNH or the waterproof WP series better protect the bearings. A higher seal rating extends life, but the added seal friction can be slightly disadvantageous at the very highest speeds.

The catalog's maximum RPM and workpiece weight figures are upper limits for each condition, not an absolute limit reachable simultaneously. Do not spin a heavy workpiece at maximum RPM — the heavier the load, the lower the safe speed must be to preserve bearing life and run-out.

Applications

Choose the BN/BS families for high-speed CNC turning of small precision parts, the TN family for heavy cutting of large shafts and rolls, the UN/WP families for coolant-rich environments, the BNH family for grinding and ultra-precision work, and the bull-head (BP) family for pipe and hollow workpieces. For an accurate model selection, prepare the workpiece drawing (weight, center-hole geometry, target RPM) and contact point@pointtec.com for a recommendation from the head company's technical team.